What would need to be upgraded?

Reply Subscribe

Thread Tools

Search this Thread

Jan 21, 2008 | 06:26 PM

abadsvt

Thread Starter

Teching In

Joined: Nov 2006

Posts: 37

Likes: 0

What would need to be upgraded?

I was thinking about building my own twin turbo setup for a LS1 motor. I was curious on what would need to be upgraded or swapped to the motor so nothing will won't hurt any internal parts. I would only like to make between 600-700hp so i am not going as crazy as i could go. Any comments would be much appreciated. Thanks

Josh

Jan 21, 2008 | 06:32 PM

68shortstep

TECH Regular

iTrader: (1)

Joined: Oct 2005

Posts: 439

Likes: 0

From: tulsa OK

just a friendly reminder, you'll get better/faster responces in the forced induction section...

Jan 21, 2008 | 08:25 PM

abadsvt

Thread Starter

Teching In

Joined: Nov 2006

Posts: 37

Likes: 0

Quote:

Originally Posted by 68shortstep

just a friendly reminder, you'll get better/faster responces in the forced induction section...

Thanks.

Moderator can you please move this thread to the forced induction section.

Thanks
Josh

Jan 21, 2008 | 08:31 PM

ryanvv355

11 Second Club

iTrader: (17)

Joined: Mar 2007

Posts: 756

Likes: 1

From: Hudsonville, MI

Valve springs, pushrods, timing chain, turbo cam, ported oil pump, head studs, Cometic head gaskets, and connecting rod bolts for starters. Fuel system to keep up with the boost and really good tune to keep the pistons safe. A forged shortblock might be in your best interest.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last