Fuel pump/ harness help
Fuel pump/ harness help Hey allz,
I have an 86 c10 swapping to a 6.0/4l80. I am using an 87 (tbi) sending unit in a new 87 tank.
here's a pic of what the wiring on the sending unit looks like:
I have not dropped the stock tank, but it is for a carb. I want to get an intank pump and a nice harness. Been looking at the pump/harness from racetronix.
http://www.racetronix.com/RX-G7-FPKG.html
I am not sure which one I need. I would like to use the connector, instead of cutting splicing... I know on my stock setup on my truck, I will have to run a wire from new pcm to fuel pump/relay in back. Anyone sell the connector so it will look clean?
But I do not know which harness/pump kit is right for me. Anyone have any suggestions?
thx
I have an 86 c10 swapping to a 6.0/4l80. I am using an 87 (tbi) sending unit in a new 87 tank.
here's a pic of what the wiring on the sending unit looks like:
I have not dropped the stock tank, but it is for a carb. I want to get an intank pump and a nice harness. Been looking at the pump/harness from racetronix.
http://www.racetronix.com/RX-G7-FPKG.html
I am not sure which one I need. I would like to use the connector, instead of cutting splicing... I know on my stock setup on my truck, I will have to run a wire from new pcm to fuel pump/relay in back. Anyone sell the connector so it will look clean?
But I do not know which harness/pump kit is right for me. Anyone have any suggestions?
thx
