6.0 swap please help!!
Thread Starter
Teching In
Joined: Mar 2008
Posts: 9
Likes: 0
From: AL
6.0 swap please help!! my 2000 yukon denali is in need of more hp & torque it is the old body style with the gen II 5.7 vortec with 4L60 & 4X4,how difficult would it be to swap in a 6.0?Can i use my trans?Would i have to get computer and wiring harness from donor truck?
Thread Starter
Teching In
Joined: Mar 2008
Posts: 9
Likes: 0
From: AL
alright i found that i can use my trans just gotta find a crank spacer & longer bolts i seen on another forum using the factory motor mounts i have on the 5.7 already so how about wiring that was what i was looking forward to ill probably get a custom harness from nelson performance so is this all i need?Please all advice is welcome!!!
It sounds like the '99 or '00 LQ4 engines would work, as they came stock with the kind of spacer that it sounds like you're talking about...
You might confirm that for yourself though... Good luck.
You might confirm that for yourself though... Good luck.
