Big Thank You to John @ Speartech
Thread Starter
On The Tree
Joined: Mar 2003
Posts: 155
Likes: 0
From: San Ramon, CA
Big Thank You to John @ Speartech Thanks for your hard work at making our OBD2 complete wiring harness for out 91Z LS1. My dad talked to you on the phone about how it passed the California State Referee and smog. We couldn't have done it if you hadn't put all the time into that harness and thanks again, and a CD with all the pics will be there to you shortly.
For anyone else I suggest getting in touch with John @ Speartech for all your harness/conversion needs.
For anyone else I suggest getting in touch with John @ Speartech for all your harness/conversion needs.
Thread Starter
On The Tree
Joined: Mar 2003
Posts: 155
Likes: 0
From: San Ramon, CA
Re: Big Thank You to John @ Speartech Thanks,
We used Third Gen Resource mounts for the engine and trans. They are actually the one thing I didn't take pics of. But I have the link to them so you can see what they look like.
http://www.thirdgenresource.com/inc/...1&pid=2047
Yes we have driven the car a couple hundred miles so far, it runs good, no probs or anything. Certainly much stronger then the 305 T5 setup it had.
We used Third Gen Resource mounts for the engine and trans. They are actually the one thing I didn't take pics of. But I have the link to them so you can see what they look like.
http://www.thirdgenresource.com/inc/...1&pid=2047
Yes we have driven the car a couple hundred miles so far, it runs good, no probs or anything. Certainly much stronger then the 305 T5 setup it had.
Joined: Nov 2001
Posts: 1,707
Likes: 33
From: Anderson, Indiana
Re: Big Thank You to John @ Speartech Glad it all worked out for you! Yes, that was quite the harness to setup, 
but we showed those smog *****! 
I look forward to seeing the pictures. Nice car!
but we showed those smog *****! I look forward to seeing the pictures. Nice car!
__________________
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
Nearly 4 years later, it is still true I'm going to drag this one up to say ditto... even though I didn't buy anything from Speartech, his advice on my fuel pump problem in my Supra swap was right on the money. 
If I needed to buy something, I would definitely deal with him.
If I needed to buy something, I would definitely deal with him.
