K Member Swap Possibilities

Reply Subscribe

Thread Tools

Search this Thread

Jun 30, 2008 | 07:22 AM

92vertz28

Thread Starter

Teching In

Joined: Jun 2008

Posts: 3

Likes: 0

K Member Swap Possibilities

Is it possible to bolt in a k member from a 4th gen ls1 car into a third gen car? I am in the process of getting my oarts together for the ls swap, and was just curious if anyone had tried swapping k members.

Jun 30, 2008 | 07:29 AM

tracar91

Teching In

iTrader: (1)

Joined: Apr 2007

Posts: 40

Likes: 0

Quote:

Originally Posted by 92vertz28

I don't have much experience with the 4th gen side, but just finished my 91Z swap. I used a Spohn tubular K member, and I do not believe there is an easy way to use the 4th gen K member (different suspension setup)

It's easy enough to use your existing K member if you don't want/ Need AC (using the ls1 AC compressor) I used a tubular K member for the small wieght savings and the ability to use the LS1 AC compressor without notching my stock K member.

Jun 30, 2008 | 09:40 PM

SheldonZ28

TECH Apprentice

iTrader: (4)

Joined: Jan 2007

Posts: 333

Likes: 0

From: Ontario, Canada

You cant use the 4th gen k-member unless you re-do the entire front end of the car.

I wish i had gone tubular k-member, but i re-used my stock one with custom mounts on it