Power top & TCS switch cover
Power top & TCS switch cover I need the small plastic cover plate with 2 holes for the switches for the power top and the traction control. This cover is located at the front of the console next to the lighter. I don't need the switches, just the cover. I would take one from any year, they should be similar. I don't care about the color. Here are a couple part numbers:
earlier gray ones: 10280511
later ebony: 10411285
earlier gray ones: 10280511
later ebony: 10411285
I need the small plastic cover plate with 2 holes for the switches for the power top and the traction control. This cover is located at the front of the console next to the lighter. I don't need the switches, just the cover. I would take one from any year, they should be similar. I don't care about the color. Here are a couple part numbers:
earlier gray ones: 10280511
later ebony: 10411285
earlier gray ones: 10280511
later ebony: 10411285
Thanks GR8RYD, but the convertible bezel is no longer available and none of the dealers stock it. It was $17 part if you can find a proper vert one NOS in the wrapper I'll give ya $35.
Once I install my console, I'll see if I am going to reuse mine. If I don't, I will let you know. I am thinking about installing the switches on the side of the console(did that in my firebird convertible before).
TECH Apprentice
Joined: Mar 2004
Posts: 317
Likes: 18
If your very lucky! I missed one on Ebay a year or so ago. Auction was for complete console but all I wanted was the plate. He offered me the plate seperate for $35 and like a dummy I didn't take him up on it. I think the complete console went for just over $100.
Trending Topics
^^Thats the problem^^ When one is for sale there is usually a console attached.
One of us should figure out a solution i.e make a bezel. But out of what? I have some stainless stock, some aluminum stock, copper stock, though copper would look like crap.
Any ideas?
I just did a black trim screw with a metal plate retainer for temp.
It looks crappy but it is better than leaving the bezel hanging out.
One of us should figure out a solution i.e make a bezel. But out of what? I have some stainless stock, some aluminum stock, copper stock, though copper would look like crap.
Any ideas?
I just did a black trim screw with a metal plate retainer for temp.
It looks crappy but it is better than leaving the bezel hanging out.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo How about twisting 6LEs arm into making replica replacements that are resin transfer molded? Or what about someone that makes plastic molds? B/c if thats the case, than you could get a plate with anywhere from 1-3 switch holes. Top, TCS, extra switch for activating something like an exhaust cutout or etc.
It will only help those with one hole, but that will not work for us with two, I have a bunch of those too.
TECH Apprentice
Joined: Feb 2003
Posts: 352
Likes: 1
From: Macedon,NY
I dont know if this will help.....
http://buffalo.craigslist.org/pts/3185653198.html
F-body junk yard in Buffalo
http://buffalo.craigslist.org/pts/3185653198.html
F-body junk yard in Buffalo
TECH Apprentice
Joined: Mar 2004
Posts: 317
Likes: 18
I dont know if this will help.....
http://buffalo.craigslist.org/pts/3185653198.html
F-body junk yard in Buffalo
http://buffalo.craigslist.org/pts/3185653198.html
F-body junk yard in Buffalo
Not sure if Santa was listening or not but our wishes have been granted gents!
Looks like someone is making these in the aftermarket now,
see ebay item #380541016299 sold by seller camarohawk
Looks like someone is making these in the aftermarket now,
see ebay item #380541016299 sold by seller camarohawk