Hey fellow 'vert owners. Can someone (preferably someone with an LS1 SS Vert) take a pic and/or measurement (measurement would be better!) of the clearance between the sway bar and the extra convertible bracing that's on the K frame?

Reason I ask is I lowered my car, and I am getting contact between the sway bar and the frame - you can see in the second picture below. I'd like to know how much distance was between those, stock, and I'll try to mimic that with my end link spacing.

It'd be very much appreciated! Been chasing this suspension "clunk" for quite a while!

The clearance I am talking about is here in the red circle:


And, here's the contact I am getting. Apparently, this extra little bracket welded to the bottom is a convertible-only brace.