3pt Subframes
3pt Subframes I did a little searching, but Im still unsure. Are there any companies that currently make 3pt sfc's for verts? I heard kenny brown ones fit, but theyre out of business. I also saw that umi has had some in development for years, but no luck there either. So does anyone have any ideas?
Hello, we don't offer a 3 point connector for your conv but we do have a very good weld in version that works great. I'll will post a pic of it.If you have any questions please give me a call.
http://www.bmrfabrication.com/F-bodyChassis.htm
http://www.bmrfabrication.com/F-bodyChassis.htm
Last edited by BMR Tech2; Dec 9, 2008 at 09:26 AM.
I found a set of Kenny Brown SFC's, basically i got really lucky
IF i didnt have them the BMR would be the only way to go
with the extra welding tabs they will be your best bet to eliminate the body flex
IF i didnt have them the BMR would be the only way to go
with the extra welding tabs they will be your best bet to eliminate the body flex
Our connectors are the best you can get.
Hello,
We do have plans for a 3-Point style eventually.. but being busy at the moment makes it tough. So they will not be available in the immediate future.
We do offer both weld in and bolt in versions for the Convertible chassis and our weld in version has a option to purchase hardware to make them 100% bolt in. This allows the user to weld them at a later date but install them now. The bolt in set-ups can be installed in 20 minutes or less and require absolutely no drilling, cutting or grinding
Bolt in-
Weld in-
If you have any questions please ask.
Thank you!
Ryan
We do have plans for a 3-Point style eventually.. but being busy at the moment makes it tough. So they will not be available in the immediate future.
We do offer both weld in and bolt in versions for the Convertible chassis and our weld in version has a option to purchase hardware to make them 100% bolt in. This allows the user to weld them at a later date but install them now. The bolt in set-ups can be installed in 20 minutes or less and require absolutely no drilling, cutting or grinding
Bolt in-
Weld in-
If you have any questions please ask.
Thank you!
Ryan
LS1Tech Sponsor
Joined: Feb 2008
Posts: 86
Likes: 0
From: Finksburg,Md
I did a little searching, but Im still unsure. Are there any companies that currently make 3pt sfc's for verts? I heard kenny brown ones fit, but theyre out of business. I also saw that umi has had some in development for years, but no luck there either. So does anyone have any ideas?
