Service Column Lock
06-06-2009, 07:01 PM
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jun 2004
Location: green bay
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Service Column Lock I recently took my 2001 Z06 out of storage and the battery was weak, but the car ran fine. I charged the battery and Im now getting the column lock error msg. The car is dying after 1.5mph so Im assuming it has gotten the recall repair done. From what I have gathered, the only thing that the recall did on those cars was reprogram the pcm to shutoff the car. I also take it that after you get an error message you can no longer just buy the k harness or clb to fix the problem? what is my next step?
06-07-2009, 11:55 PM
#4
11 Second Club
Join Date: Dec 2007
Location: north Carolina
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
There is a fuse you can pull that will allow you to get the car out of locked position...mine does it all of the time now..but since the fuse it pulled I just turn the car off and shock the steering wheel and it allows me to go on about my day after I turn the car back on. Very annoying..but at least I am not stuck some place.
06-08-2009, 11:20 AM
#5
11 Second Club
iTrader: (10)
Join Date: Mar 2002
Location: Florida
Posts: 2,728
Likes: 0
Received 0 Likes
on
0 Posts
There is a fuse you can pull that will allow you to get the car out of locked position...mine does it all of the time now..but since the fuse it pulled I just turn the car off and shock the steering wheel and it allows me to go on about my day after I turn the car back on. Very annoying..but at least I am not stuck some place.
10-13-2010, 10:37 PM
#7
CLB = Column Lock Blocker OR Column Lock Bypass (Depends on who you talk to)
http://www.corvettesofhouston.com/pr...products_id=54
Install take 20 minutes. Easy to do.
http://www.corvettesofhouston.com/pr...products_id=54
Install take 20 minutes. Easy to do.
