stock bottom end 5.7 ls6 - 500whp+
#1
Teching In
Thread Starter
iTrader: (6)
Join Date: Feb 2010
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
stock bottom end 5.7 ls6 - 500whp+
I just wanted to share the results of my build. We hit 500+ on a stock bottom end with all boltons on stock ported 243 heads.
YouTube Video
http://www.youtube.com/watch?v=xec7n7Uwl5k
YouTube Video
http://www.youtube.com/watch?v=xec7n7Uwl5k
#4
Are they saying that 11.2@119 on a their mustang dyno was about right? I would say 480rw on a MD is over 500rw on a DJ. I just know that I ran 11.2@123 with 405rw on a DJ. What size cam is in there?
#5
Teching In
Thread Starter
iTrader: (6)
Join Date: Feb 2010
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
On that run it should have been around 10.6 but the clutch was starting to act up I need a new clutch after looking at the log file we could see that it took 1.1 sec to enter 4th gear from 3 to 4. the custom grind cam is a 229/233
Trending Topics
#10
Teching In
Thread Starter
iTrader: (6)
Join Date: Feb 2010
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I actually built the motor. the 2003 z06 is my brothers car. My tuner is ED from Mongillo Motors in CT wouldn't be possible without his amazing tuning skills.
Last edited by th3m0nk3y; 03-30-2011 at 08:48 AM.