crank pulley problems
05-14-2011, 08:08 AM
#1
Teching In
Thread Starter
Join Date: Sep 2004
Location: harlingen. texas
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
crank pulley problems i have a 98 c5 and the pulley is now very close the the steering rack and not in line with the other accesories. what would cause this ? and how do i fix it?
05-14-2011, 12:37 PM
#3
Teching In
Thread Starter
Join Date: Sep 2004
Location: harlingen. texas
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
yes the bolt is still there.
what caught my attention is that the ac stopped working and i cheaked under the hood to find that the ac belt came off. because of the pulley not lined up
what caught my attention is that the ac stopped working and i cheaked under the hood to find that the ac belt came off. because of the pulley not lined up
05-14-2011, 02:40 PM
#4
Staging Lane
iTrader: (3)
Join Date: Feb 2009
Location: Texas must secede!!!
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Your balancer has failed. The rubber isolator sounds as if it let go and allowed the outer ring portion to walk forward. This is not good. Time for an underdrive pulley
05-14-2011, 09:30 PM
#6
Launching!
Join Date: Feb 2005
Location: Central California
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Change mind a few times ...........a real pain but I did it myself the last time and so for no problems......
Last edited by 99FRCTorchRed; 05-15-2011 at 09:51 PM.
05-15-2011, 05:47 AM
#7
Staging Lane
iTrader: (3)
Join Date: Feb 2009
Location: Texas must secede!!!
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Its easy, remove rack and pinion, remove pulley and install new U/D pulley ( everyone likes extra HP), Install new bolt, reinstall rack and pinion. If youve never done it before.... DONT!!! LOL.
