Corvette Performance
C5 | Z06 | C6 | ZR1 | C7

Looking for ET'S from 6 speed C5's

Thread Tools
 
Search this Thread
 
Old 03-21-2004 | 10:56 PM
  #1  
jason99frc's Avatar
Thread Starter
Launching!
iTrader: (12)
 
Joined: Nov 2003
Posts: 250
Likes: 4
From: GIVING THE SHOCKER IN ORLANDO
Default Looking for ET'S from 6 speed C5's

I'm looking for the fastest N/A STOCK HEADS times for non Z06 6 speed cars.
( Any cam any bolt ons )

I have been 11.81 @ 119.28 see sig for mods.

Who has the fastest times out there?

Last edited by jason99frc; 03-21-2004 at 11:00 PM. Reason: forgot information
Old 03-22-2004 | 08:16 AM
  #2  
ROJO99's Avatar
12 Second Club
 
Joined: Jan 2004
Posts: 409
Likes: 0
From: Dayton, Ohio
Default

Stock complete at time of run, temp 45 degrees. 13.2@109 with a 2.23 60'.
Old 03-22-2004 | 01:53 PM
  #3  
fastcoupe's Avatar
Teching In
 
Joined: Mar 2004
Posts: 5
Likes: 0
Default

Best bone stock 6m 02 12.87 @111.98
Old 03-22-2004 | 09:05 PM
  #4  
NVR4GET's Avatar
10 Second Club
iTrader: (3)
 
Joined: Nov 2003
Posts: 544
Likes: 0
From: HTOWN
Default

Did you only make 365 RWHP / 355 RWTQ and ran 11.8's? If so wow! I have a 99' FRC 6 speed with tpis, mti ramair, G5X2 cam MTI tunning, ported maf, STOCK 99 EXHAUST. Made 385rwhp/359rwtq. I went on a bad night and only ran 12.2@114 with a 1.8 sixy foot. I think I can run an 11.9 on a better night. I was down about 3 mph
Matt
Old 03-23-2004 | 12:02 PM
  #5  
99hardtopc5's Avatar
Teching In
 
Joined: Feb 2004
Posts: 16
Likes: 0
From: SAN ANTONIO,TX
Default

stock 99 6spd. 13.55@108 2.20 60' , added ls1 hotcam same exact et and mph in horible air.going for dyno tune this week




All times are GMT -5. The time now is 04:44 PM.