Lookin for some parts
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
Lookin for some parts I am looking for a C6 rear cradle... just the cradle, no springs or control arms, and also a C6 differential. Not to mention, diff mounts(aftermarket mounts).
If anyone knows of anyone that is selling something along the lines of the above,..please let me know. I am very interested.
Gear needs to be a 2.73 to a 3.42 please....preferably a 3.42
On that note, I will be posting up my T56 MN6 , DTE brace, and rear right outputshaft, C6Z06 clutch packed 2.73 diff and C5 rear cradle. I will be selling soon, possibly in one weeks time. The Textralia exoskel triple disc will also be for sale soon, more then likely. Most of it is brand new, but one disc was sent slightly bent,...so, it didn't disengage,..and I pulled it for new packaged combo I bought.... so I have no need for it but lots of spares for it. The clutch will hold lots of power,..just needs one new disc,..I will include spares if wanted. It will end up being a twin disc and a triple disc together probably...to sweeten the deal.
DTE brace MAY be spoken for, everything else, will be available if needed.
The trans is stock...I have never had any problems with it, what so ever. Not one. I have been a technician for years,..always making sure the fluids where the way they were supposed to be, clean. Diff has never seen the strip.
C6 cradle, C6 diff...I am in the hunt for.... thank you in advance.
If anyone knows of anyone that is selling something along the lines of the above,..please let me know. I am very interested.
Gear needs to be a 2.73 to a 3.42 please....preferably a 3.42
On that note, I will be posting up my T56 MN6 , DTE brace, and rear right outputshaft, C6Z06 clutch packed 2.73 diff and C5 rear cradle. I will be selling soon, possibly in one weeks time. The Textralia exoskel triple disc will also be for sale soon, more then likely. Most of it is brand new, but one disc was sent slightly bent,...so, it didn't disengage,..and I pulled it for new packaged combo I bought.... so I have no need for it but lots of spares for it. The clutch will hold lots of power,..just needs one new disc,..I will include spares if wanted. It will end up being a twin disc and a triple disc together probably...to sweeten the deal.
DTE brace MAY be spoken for, everything else, will be available if needed.
The trans is stock...I have never had any problems with it, what so ever. Not one. I have been a technician for years,..always making sure the fluids where the way they were supposed to be, clean. Diff has never seen the strip.
C6 cradle, C6 diff...I am in the hunt for.... thank you in advance.
oooo like the sound of this, so what trans did you find?
here is the cradle:
http://www.ebay.com/itm/C6-Chevy-Cor...8fb65b&vxp=mtr
here is the cradle:
http://www.ebay.com/itm/C6-Chevy-Cor...8fb65b&vxp=mtr
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
oooo like the sound of this, so what trans did you find?
here is the cradle:
http://www.ebay.com/itm/C6-Chevy-Cor...8fb65b&vxp=mtr
here is the cradle:
http://www.ebay.com/itm/C6-Chevy-Cor...8fb65b&vxp=mtr
TR6060 ZR1 export
Tilton triple disc
C6 torque tube w 3" shaft and ZR1 couplers
SFI steel bellhousing
Trans cooler
Just gotta buy Moutns, diff, and cradle...good to clutch drop.
I can't wait. I saw that ebay cradle last night....I am trying to get a local down under 300 right now.
Thanks player TR6060 ZR1 export
Tilton triple disc
C6 torque tube w 3" shaft and ZR1 couplers
SFI steel bellhousing
Trans cooler
Just gotta buy Moutns, diff, and cradle...good to clutch drop.
I can't wait. I saw that ebay cradle last night....I am trying to get a local down under 300 right now.
Thanks playerDamn nice work. That is exactly what I was looking for. Glad you swooped one up. I had a trans bought local and the guy sold it out from under me.
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
Paid.
Soon to be for sale:
Textraila ExoSkel triple disc-with extras
T56 MN6 stock
2.73 diff with righ op shaft and C6 Z06 clutch packs
DTE brace
C5 Cradle
Mustang 1993 notch back
5.3 short block
some other stuff.
Should be removing from car SOON, maybe this weekend.
Soon to be for sale:
Textraila ExoSkel triple disc-with extras
T56 MN6 stock
2.73 diff with righ op shaft and C6 Z06 clutch packs
DTE brace
C5 Cradle
Mustang 1993 notch back
5.3 short block
some other stuff.
Should be removing from car SOON, maybe this weekend.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
Brace is sold to a good local buddy, called it before anyone. If I don't sell it to him, he'd probably key my car every time he ran into it.
I will have a transmission for sale, a diff, cradle, Textralia Clutches(triple disc with extra plates and disc's) and maybe a few other things.
I will have a transmission for sale, a diff, cradle, Textralia Clutches(triple disc with extra plates and disc's) and maybe a few other things.
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
Cradle showed up today.
Waiting on diff to show...and trans/diff mounts. Thats it. Thought about a brace kit for it like my DTE for my T56 but,..not sure how much it's needed with the new setup.
Waiting on diff to show...and trans/diff mounts. Thats it. Thought about a brace kit for it like my DTE for my T56 but,..not sure how much it's needed with the new setup.
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
FML
Diffs didn't get ordered cause dude called back and said he gave us wrong part numbers, and price just went up a few hundred bucks, each diff. So...we halted.
Confusing ****,...dealing with all these part numbers, and nobody seems to really know(thats selling them) what the **** they are.
Diffs didn't get ordered cause dude called back and said he gave us wrong part numbers, and price just went up a few hundred bucks, each diff. So...we halted.
Confusing ****,...dealing with all these part numbers, and nobody seems to really know(thats selling them) what the **** they are.
