Transmission Conversion 2006 Z06 Corvette TCM2000
Thread Starter
Registered User
Joined: Mar 2019
Posts: 2
Likes: 0
Transmission Conversion 2006 Z06 Corvette TCM2000 Hi All,
I’m converting Vette from standard to auto and im using a PCM TCM2000 controller. The transmission is already installed and outputs are wired. I’m looking for some guidance on wiring the inputs. Specifically where do I need to wire the CAN wire to and do I need to wire inputs directly to speed sensor, throttle position sensor, etc?
Any help is appreciated! I’ve had trouble finding someone who’s done one before.
I’m converting Vette from standard to auto and im using a PCM TCM2000 controller. The transmission is already installed and outputs are wired. I’m looking for some guidance on wiring the inputs. Specifically where do I need to wire the CAN wire to and do I need to wire inputs directly to speed sensor, throttle position sensor, etc?
Any help is appreciated! I’ve had trouble finding someone who’s done one before.
well I cant give you any guidance but I can tell you congrats you must be trying to win some Drag Races!!!! anyway are you going with the built RPM 4l60e tranny or doing a built A6 either way good and post up #s and ETs afterwards
