Just installed a Line Lock
Just installed a Line Lock Wrapped up my Nitrous install and had the line lock plumbed and got to try it out today 
What a blast 
Used a couple tutorials from the Corvette Forum one was Cajun Dudes and the other was this one http://corvetteforum.shelor.net/Line_Lock/default.asp
Fabbed my own bracket with a piece of aluminum from the hardware store, used a bandsaw to rough shape it then filed the sharped edges.
Here it is before the plumbing
Used the Cigerette Lighter hole for the button...no cutting required
What a blast Used a couple tutorials from the Corvette Forum one was Cajun Dudes and the other was this one http://corvetteforum.shelor.net/Line_Lock/default.asp
Fabbed my own bracket with a piece of aluminum from the hardware store, used a bandsaw to rough shape it then filed the sharped edges.
Here it is before the plumbing
Used the Cigerette Lighter hole for the button...no cutting required
Last edited by Beer99C5; Jun 11, 2006 at 02:48 PM.
