A/C problem
#1
A/C problem
Hello,
The air condition works for pessenger side, but the air at the driver side is not cold . It was like this when I bought the car(2001 z06). The HVAC didn't have any lights also, so I just installed a new one. I was hoping that it might be the problem but I just realized that it is not. I changed the fuses also, nothing changed. I checked it there are no codes. Did anyone have a similar problem?
Thanks in advance,
Tamer
The air condition works for pessenger side, but the air at the driver side is not cold . It was like this when I bought the car(2001 z06). The HVAC didn't have any lights also, so I just installed a new one. I was hoping that it might be the problem but I just realized that it is not. I changed the fuses also, nothing changed. I checked it there are no codes. Did anyone have a similar problem?
Thanks in advance,
Tamer
#5
TECH Apprentice
iTrader: (2)
Join Date: Jul 2006
Location: TX
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Has the intake manifold been changed? You might have a vacuum leak that helps to open and close the blend door between A/C and vent. I have ran into porblems where the vacuum hose has broke around the map sensor to anywhere inside the wiring harness behind the battery.
Chad
Chad