Someone Please Friggin Help

Reply Subscribe

Thread Tools

Search this Thread

Sep 20, 2006 | 08:58 PM

c5_ls1_6spd

Thread Starter

Banned

iTrader: (-1)

Joined: Jan 2006

Posts: 800

Likes: 0

Someone Please Friggin Help

MS3 114lsa, TSP stg 1 (2.00/1.55 valves) CNC LS6 heads, unmilled, stock gm head gaskets....what correct sized pushrods should be used???

Sep 20, 2006 | 10:21 PM

slowride

TECH Resident

iTrader: (3)

Joined: May 2006

Posts: 957

Likes: 118

From: New Hartford, IA

Well you should measure that with a adjustable pushrod. If you can't get a adjustable pushrod to check then a stock length or .025" longer SHOULD work, but don't quote me on that. So probably 7.400"-7.425" would be what you want.

Sep 20, 2006 | 11:16 PM

96-speed

TECH Enthusiast

iTrader: (19)

Joined: Jan 2002

Posts: 687

Likes: 0

From: Houston, TX

Quote:

Originally Posted by slowride

Ditto. Even if someone told "xxx" size will work, I'd still doube check. Every car is a little different. However, the LSx cars seem almost too easy to work on. I bet you'd be surprised at how many people couldn't set a distributer or lash valves.

Ryan