What will swap from my TA
What will swap from my TA all theese are not installed
cam 232/236 600/600 112 lsa 3 deg adv
wieand intake
85mm tb
3800 stall
18x8.5 and 18x9.5 35+ offset
hopefully all of them!!!
looking to get a c5
cam 232/236 600/600 112 lsa 3 deg adv
wieand intake
85mm tb
3800 stall
18x8.5 and 18x9.5 35+ offset
hopefully all of them!!!
looking to get a c5
The cam will and the wheels though I would probably get something wider the vette doesn't need any spacers or anything so you can put some huge *** wheels on them. Leave the wieand intake everyone is always telling me those things are junk the ls6 is great. The throttle body on the vette is drive by wire not cable and the stall should work not quite sure I personally never mess with automatics.
well depending if it already has the ls6 intake is one thing, ive done my research on the intake...i will use it for nitrous reasons. i already have the weels and love em and they are wider than the factory so i am okay with that. as far as the stall if it doesnt fit i will get a 6
the cam will work, intake and rims.
The tb has to be the drive by wire one, no cable on the vettes. You can use a 90mm Ls2 tb, you just have to get the $60 harness for it from texas-speed.
The stall I have no idea, sorry
The tb has to be the drive by wire one, no cable on the vettes. You can use a 90mm Ls2 tb, you just have to get the $60 harness for it from texas-speed.
The stall I have no idea, sorry
pretty sure for some reason the vette 4l60e has lt1 splines dunno if that rings a bell and the ls2 tb is a 4 bolt isnt it? wont work on my 3bolt manifold who makes a big drive by wire.
