Huge thanks to eb0z06 and SLED28!!!
Thread Starter
Teching In
Joined: Oct 2005
Posts: 34
Likes: 0
Huge thanks to eb0z06 and SLED28!!! We flew Arun in to tune our corvette, 402 (built by Candadian Performance) Vortech JT-trim.......785rwhp at 14psi!!! We started at 600rwhp and was beyond lean, Arun first tune brought in 748 rwhp and 3rd was 770, then 785rwhp. We were running out of injector but had way more left in it, there is no doubt in my mind that we would have hit over 900 rwhp had we run 20psi and more injector. Arun's experience was awesome, he's a stand up guy and very cool to deal with. Anyone looking for a tuner, I highly recommend him, and anyone looking for a built engine.......buy there 800rwhp D-1 engine package!!! Thanks again Mike@SanDale.
www.sandalefabrication.com
www.sandalefabrication.com
Last edited by Salley347; Jun 20, 2007 at 03:33 PM.
I didn't know you we're on here Mike! Thanks for the props! Glad to hear everything is working out good. Rosie must be freaking out!!! And don't forget the 1000+ F1R setup coming out soon!
Originally Posted by Salley347
We flew Arun in to tune our corvette, 402 (built by Candadian Performance) Vortech JT-trim.......785rwhp at 14psi!!! We started at 600rwhp and was beyond lean, Arun first tune brought in 748 rwhp and 3rd was 770, then 785rwhp. We were running out of injector but had way more left in it, there is no doubt in my mind that we would have hit over 900 rwhp had we run 20psi and more injector. Arun's experience was awesome, he's a stand up guy and very cool to deal with. Anyone looking for a tuner, I highly recommend him, and anyone looking for a built engine.......buy there 800rwhp D-1 engine package!!! Thanks again Mike@SanDale.
www.sandalefabrication.com
www.sandalefabrication.com
Nice numbers,..i'm sure the car is a riot to drive.
TECH Fanatic
iTrader: (1)
Joined: Oct 2002
Posts: 1,851
Likes: 0
From: Elmhurst, IL (Chicago Suburb)
Originally Posted by Salley347
We flew Arun in to tune our corvette, 402 (built by Candadian Performance) Vortech JT-trim.......785rwhp at 14psi!!! We started at 600rwhp and was beyond lean, Arun first tune brought in 748 rwhp and 3rd was 770, then 785rwhp. We were running out of injector but had way more left in it, there is no doubt in my mind that we would have hit over 900 rwhp had we run 20psi and more injector. Arun's experience was awesome, he's a stand up guy and very cool to deal with. Anyone looking for a tuner, I highly recommend him, and anyone looking for a built engine.......buy there 800rwhp D-1 engine package!!! Thanks again Mike@SanDale.
www.sandalefabrication.com
www.sandalefabrication.com
Arun and Dave of Canadian Performance simply kick *** in the LS world!
TECH Fanatic
Joined: Feb 2005
Posts: 1,123
Likes: 0
From: Maypearl, TX
Originally Posted by Salley347
We flew Arun in to tune our corvette, 402 (built by Candadian Performance) Vortech JT-trim.......785rwhp at 14psi!!! We started at 600rwhp and was beyond lean, Arun first tune brought in 748 rwhp and 3rd was 770, then 785rwhp. We were running out of injector but had way more left in it, there is no doubt in my mind that we would have hit over 900 rwhp had we run 20psi and more injector. Arun's experience was awesome, he's a stand up guy and very cool to deal with. Anyone looking for a tuner, I highly recommend him, and anyone looking for a built engine.......buy there 800rwhp D-1 engine package!!! Thanks again Mike@SanDale.
www.sandalefabrication.com
www.sandalefabrication.com
r u gonna put bigger injectors, or stay where you are? Very nice numbers man! 
