1/8 mile results.. somewhat diapointed
#1
On The Tree
Thread Starter
Join Date: Mar 2007
Location: Fairfax Virginia
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
1/8 mile results.. somewhat diapointed
Im somewhat disapointed with my results, but also somewhat happy.
2000 LS1 T/A
I ran a 8.6 @ 85 with a lousy 2.1 60ft. Car has basic bolt ons, headers, lid, subframe ls7 clutch and tick stage 2 T56. Car grabed and shifted like a ****, but I thought I would run a bit faster. I think the trap speed is reflective of a sub 8.5 pass what do you all think?
On a side note. After my runs I noticed a lot more built up rubber on the passenger side wheel well than the driver side, I mean a lot more. Its almost like the drivers side wasnt spinning. The car would kick sideways untill I had enough brake on it to keep it stopped and then I would do a 5-10 second burnout. I know its a limited slip but it sure seemed like only one wheel was firing.
2000 LS1 T/A
I ran a 8.6 @ 85 with a lousy 2.1 60ft. Car has basic bolt ons, headers, lid, subframe ls7 clutch and tick stage 2 T56. Car grabed and shifted like a ****, but I thought I would run a bit faster. I think the trap speed is reflective of a sub 8.5 pass what do you all think?
On a side note. After my runs I noticed a lot more built up rubber on the passenger side wheel well than the driver side, I mean a lot more. Its almost like the drivers side wasnt spinning. The car would kick sideways untill I had enough brake on it to keep it stopped and then I would do a 5-10 second burnout. I know its a limited slip but it sure seemed like only one wheel was firing.
#3
On The Tree
Thread Starter
Join Date: Mar 2007
Location: Fairfax Virginia
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I think I just need some practice. Its been a few years since Ive been to the track so I am prolly lacking on the launching. The last run I reved to 3k and eased out the clutch till I felt it would hook and hammered it, I prolly could have hit it before I did and it wouldnt bog that much. I was also running on 35 psi. Im happy with the tires though. Riken Raptors hooked pretty well. Better to be losing that 60ft time because of bogging than spinning right?
One run I trapped @ 86 so I know the car has a lot more in her. Whats a good rule of thumb for 60ft to E.T? Say I can get my 60ft <2.0 would that net me around an 8.2 all things equal?
I wish I didnt have to drive through the fuking water box everytime though cuz I dont want to do a long burnout each time to get everything off the tires, they hook just fine with a quick spin.
One run I trapped @ 86 so I know the car has a lot more in her. Whats a good rule of thumb for 60ft to E.T? Say I can get my 60ft <2.0 would that net me around an 8.2 all things equal?
I wish I didnt have to drive through the fuking water box everytime though cuz I dont want to do a long burnout each time to get everything off the tires, they hook just fine with a quick spin.
#4
11 Second Club
iTrader: (3)
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I think I just need some practice. Its been a few years since Ive been to the track so I am prolly lacking on the launching. The last run I reved to 3k and eased out the clutch till I felt it would hook and hammered it, I prolly could have hit it before I did and it wouldnt bog that much. I was also running on 35 psi. Im happy with the tires though. Riken Raptors hooked pretty well. Better to be losing that 60ft time because of bogging than spinning right?
One run I trapped @ 86 so I know the car has a lot more in her. Whats a good rule of thumb for 60ft to E.T? Say I can get my 60ft <2.0 would that net me around an 8.2 all things equal?
I wish I didnt have to drive through the fuking water box everytime though cuz I dont want to do a long burnout each time to get everything off the tires, they hook just fine with a quick spin.
One run I trapped @ 86 so I know the car has a lot more in her. Whats a good rule of thumb for 60ft to E.T? Say I can get my 60ft <2.0 would that net me around an 8.2 all things equal?
I wish I didnt have to drive through the fuking water box everytime though cuz I dont want to do a long burnout each time to get everything off the tires, they hook just fine with a quick spin.
#6
On The Tree
Thread Starter
Join Date: Mar 2007
Location: Fairfax Virginia
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Cool, well I deffinitely think I can get a low 8 second pass with some more practice and whatnot. The power is there, and thats what I am happy about. If I ever get some more money together, a LS6 intake and port and polish throttle body is in store.