LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   Drag Racing Results (https://ls1tech.com/forums/drag-racing-results-85/)
-   -   Almost in the 5's (https://ls1tech.com/forums/drag-racing-results/1914375-almost-5s.html)

Jtm2085 Jan 30, 2019 08:21 PM

Almost in the 5's
 
First track outing of the year. The DA was a -100 and I almost met my goal for the current combo, which is a 5.99 pass. The first pass was on motor and it was a PB 6.91 at 100mph and 10.83. The car was spinning on the nitrous passes, but the best was a 6.08 at 114, let off at the 1/8 coasted to a 10.15 1/4. The 1/4 traps were off all day. They laid some fresh prep on the track and I tried one last time to break into the 5's. The car dead hooked, pulled the tires and then the rear end broke. Ls6, tfs220's, btr 4 cam, nitrous outlet plate kit and th400


​https://youtu.be/6Z97JepDD0M
https://youtu.be/GtI2WoU__6o
​​​​​​
https://cimg4.ibsrv.net/gimg/ls1tech...e6d10208ad.jpg

sxc Z28 Jan 31, 2019 07:47 AM

Nice pass! What rear were you running?

Jtm2085 Jan 31, 2019 09:07 AM

Thanks! It is a moser 9in, with 31 spline axles and the a trac lock. I haven't pulled it apart yet, but I'm willing to bet the trac lock shit the bed. Time for a light weight spool

Doug G Jan 31, 2019 07:32 PM

Damn, congrats :cheers: on the PB

What size shot ?

Jtm2085 Jan 31, 2019 10:03 PM

Thanks Doug, I was running a 250 shot. I really wanted a 5.99, but I guess I will have to be content

Doug G Feb 2, 2019 07:54 AM

Sucks when shit breaks, throw in some 35's and a spool....one place a little over-kill wont hurt.

That's the plan I took, cost was the same 31/33/35.

Jtm2085 Feb 2, 2019 08:25 AM

Yep, that's the plan if I have a broke axle. If it's just the shitty trac lok I will just replace it with a spool for now. I still need a few more things to be ready to race for the year lol

Jamie R. Feb 3, 2019 09:06 PM

Congrats man that's getting it done !

Jamie R
2kTa

Jtm2085 Feb 3, 2019 09:21 PM


Originally Posted by Jamie R. (Post 20041755)
Congrats man that's getting it done !

Jamie R
2kTa

thank you Jamie. Pulled the axles out, they look good. Looks like it's time for a spool

z28241 Feb 5, 2019 05:38 PM

Jt +1 on the Spool, i just went to a Spool myself

assasinator Feb 9, 2019 07:21 PM


Originally Posted by Jtm2085 (Post 20039745)
First track outing of the year. The DA was a -100 and I almost met my goal for the current combo...The first pass was on motor and it was a PB 6.91 at 100mph and 10.83. The car dead hooked, pulled the tires and then the rear end broke. Ls6, tfs220's, btr 4 cam, nitrous outlet plate kit and th400

you realize josh, that your car has a ls6 block, TFS heads, a decently large cam, high stall converter, a SD tune, and on motor you make 500rwhp. honest to god 500rwhp....all of those things. and you are slower than someone else's silver SS with stock 243s, stock cam, stock ls6, and street tires.

you achievements are exactly the way a car like your should and will perform. but you are 1 tenth slower and a bunch of MPH slower than that other Silver SS in spite of all of your work making you car a FANTASTIC drag car.

just sayin. your car is incredible man. but slower and not as good of a performer as a stock LS6.

Jtm2085 Feb 10, 2019 04:46 PM

Lol, I feel like it runs pretty well for what it is. The converter obviously isn't set up for NA, and that hurts it for sure. I really need to weigh it again. I'm sure it's a few hundred lbs heavier than the car your talking about. I wish the trap would have been working on that run. I would guess it was 126-127. Pulled the 3rd member out, shattered the spider gears lol.


All times are GMT -5. The time now is 06:34 AM.


© 2026 MH Sub I, LLC dba Internet Brands