Gettin it done!
Thread Starter
11 Second Club
iTrader: (2)
Joined: Dec 2001
Posts: 1,297
Likes: 0
From: Upper Marlboro, MD
Gettin it done! I finally got around to changing the rear springs back to stock, fronts still have the Eibachs on them.
1st (left lane)
60-1.65
1/8-7.512@98.15
1/4-11.68-122.36
Think the 1/8 and 1/4 mphs might be flukes or incorrect. Left lane always seems to trap higher than the right.
2nd (right lane)
60-1.645
1/8-7.565@94
1/4-11.717@120.07
Finally officially broke the 120mph barrier cam only
3rd (right lane)
60-1.599 <--stock shocks and springs
1/8-7.487@93.8
1/4-11.65@119.53
Looks like my little 230/236 cam, budget JetHot headers, and stock LS6 intake are gettin 'r done
1st (left lane)
60-1.65
1/8-7.512@98.15
1/4-11.68-122.36
Think the 1/8 and 1/4 mphs might be flukes or incorrect. Left lane always seems to trap higher than the right.
2nd (right lane)
60-1.645
1/8-7.565@94
1/4-11.717@120.07
Finally officially broke the 120mph barrier cam only
3rd (right lane)
60-1.599 <--stock shocks and springs
1/8-7.487@93.8
1/4-11.65@119.53
Looks like my little 230/236 cam, budget JetHot headers, and stock LS6 intake are gettin 'r done
