Working on the Dash W/ Pics
Working on the Dash W/ Pics I decided to start working on the dash while its out. I manage to mount my delay box and mount a blockoff plate for switches. I used a couple machine head screws and epoxyed them into place let it setup for an hour and it was good to go.. wasnt sure if i should have added two more for the top and bottom.. seems to be pretty durable .. I used .063 Aluminum for the block off plate. I removed 4 vents for 4 2 5/8 guages, these holes are nice in the firebird for mounting guages. Now time to work on the blockoff plate where the old guages were. Also this still snaps into place with NO problems i can remove it in a couple seconds.
