New Firebird Hood Design
New Firebird Hood Design This Is A revised Version Of our 5 inch Raised Ws6 Hood, And We gave it a similar slope like the Sunoco hoods and it flows very nice with the fenders, Its 5inches tall, extends to the windshield and you can see over it, from inside the car it appears to look like a 2 or 3 inch cowl, it also fills in the wiper gaps and the area in front of the mirrors, This is the first of several new offerings for the Firebird. Before giving something totally new we wanted to Improve what we already have available.
Trending Topics
Hi Guys.
Thanks for the feedback...
This hood will be available in a week (possibly two) for us to start accepting orders on it. The retail price of this hood would be the same as our 5" extended - $520.00 - but of course once it is complete, we will have a gp available for this item.
I'm just not sure of the price yet at this time (sorry!)
We will also offer in the very near future, a bolt on hood with this scoop design. The height on this hood is 5", but as you can see, it comes back down towards the hood in the back so it allows much better visibility then what our 5" extended allowed.
We made the mold for this hood using a factory hood, so it will fit nicely...no huge gaps or major work needed to fit.
Thanks for the feedback...
This hood will be available in a week (possibly two) for us to start accepting orders on it. The retail price of this hood would be the same as our 5" extended - $520.00 - but of course once it is complete, we will have a gp available for this item.
I'm just not sure of the price yet at this time (sorry!)We will also offer in the very near future, a bolt on hood with this scoop design. The height on this hood is 5", but as you can see, it comes back down towards the hood in the back so it allows much better visibility then what our 5" extended allowed.
We made the mold for this hood using a factory hood, so it will fit nicely...no huge gaps or major work needed to fit.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Hi Guys.
Thanks for the feedback...
This hood will be available in a week (possibly two) for us to start accepting orders on it. The retail price of this hood would be the same as our 5" extended - $520.00 - but of course once it is complete, we will have a gp available for this item. I'm just not sure of the price yet at this time (sorry!)
We will also offer in the very near future, a bolt on hood with this scoop design. The height on this hood is 5", but as you can see, it comes back down towards the hood in the back so it allows much better visibility then what our 5" extended allowed.
We made the mold for this hood using a factory hood, so it will fit nicely...no huge gaps or major work needed to fit.
Thanks for the feedback...
This hood will be available in a week (possibly two) for us to start accepting orders on it. The retail price of this hood would be the same as our 5" extended - $520.00 - but of course once it is complete, we will have a gp available for this item.
I'm just not sure of the price yet at this time (sorry!)We will also offer in the very near future, a bolt on hood with this scoop design. The height on this hood is 5", but as you can see, it comes back down towards the hood in the back so it allows much better visibility then what our 5" extended allowed.
We made the mold for this hood using a factory hood, so it will fit nicely...no huge gaps or major work needed to fit.
