Updated c5r pics 
Updated c5r pics
Thoughts??? You want thoughts. Well how about this thought, I'm fricken jealous.
You guys and ya'lls guns.
One day I'm going to get me one of them guns too.
Till then I just have to drool.
Dude that's a bad *** looking bullet you got there!!!
Oh yea, and I really dig the oiling system & and vacuum pump. That's slick!!
-Dave
You guys and ya'lls guns. One day I'm going to get me one of them guns too. Till then I just have to drool. Dude that's a bad *** looking bullet you got there!!!Oh yea, and I really dig the oiling system & and vacuum pump. That's slick!!
-Dave
Last edited by dacajun; Sep 1, 2009 at 08:31 PM.
Nice looking set-up
What fitting are you using to tap into the oil galley above the normal filter locations. I am going to run a Accusump and wanted to tap into the same port.
What fitting are you using to tap into the oil galley above the normal filter locations. I am going to run a Accusump and wanted to tap into the same port.
Trending Topics
Looks killer. What vacum pump is that, as I wanted to put one of those on my sled, that one looks like it bolts up pretty easy, and can you run a single -10 line to the pump, or do you need 2 feeds?
I like the oil filter relocation too, that's sweet. Any reason you put it up on the motor and not on the framerail/etc, or is it just there for now?
Definately looks like you're aiming for an 8 second n/a setup... you're going all out! Can't wait to see the results!
I like the oil filter relocation too, that's sweet. Any reason you put it up on the motor and not on the framerail/etc, or is it just there for now?
Definately looks like you're aiming for an 8 second n/a setup... you're going all out! Can't wait to see the results!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
TECH Resident
Joined: Aug 2003
Posts: 835
Likes: 0
From: aiken ,sc
looks good we were just getting ready to do this to our friends car,he hasa Kinsler fuel injection and an old DFI setup[right now runs 5.80 in the 1/8 on motor 8.80,s in the 1/4]and want to go carb.can you pm me where you got everything to do the swap, thanks 
Looks killer. What vacum pump is that, as I wanted to put one of those on my sled, that one looks like it bolts up pretty easy, and can you run a single -10 line to the pump, or do you need 2 feeds?
I like the oil filter relocation too, that's sweet. Any reason you put it up on the motor and not on the framerail/etc, or is it just there for now?
Definately looks like you're aiming for an 8 second n/a setup... you're going all out! Can't wait to see the results!
I like the oil filter relocation too, that's sweet. Any reason you put it up on the motor and not on the framerail/etc, or is it just there for now?
Definately looks like you're aiming for an 8 second n/a setup... you're going all out! Can't wait to see the results!
Ok, i have been getting requests for info on timing pointer and oil pressure fitting. Timing pointer is 85.00 and the fitting is stainless and also 85.00. Should have some more pics this week and off to dyno hopefully next week. woohoo
