Launching ?
Thread Starter
Teching In
Joined: Jan 2010
Posts: 14
Likes: 0
From: Winder
Launching ? I'm gonna be running a 26x10.50x16 ET street, so my ? is on a full susp. car with a built 12 bolt, and 3.73's at what rpm should i even begin to try to launch this thing. i also have a six speed. with H/C/I. these will be motor passes also.
Thread Starter
Teching In
Joined: Jan 2010
Posts: 14
Likes: 0
From: Winder
well that what i usually do, but i wasnt sure on this one.
some stock style replacements, thinking about doing some 50/50's.
some stock style replacements, thinking about doing some 50/50's.
6 & 8 Second Club
Joined: Aug 2006
Posts: 2,284
Likes: 0
From: Illinois, RT 66 dragway area
.
I'd rather start a little slower and not waste runs, or risk getting sideways.
You will gather a lot more information at 2500-3000 and actually making the pass.
Then dumping it at 6000 and wasting time, money & fuel.
.
I'd rather start a little slower and not waste runs, or risk getting sideways.
You will gather a lot more information at 2500-3000 and actually making the pass.
Then dumping it at 6000 and wasting time, money & fuel.
.
