Ryans_pewter_ss

iTrader: (9)

The car is an 02' SS, HKE 396, mamo ported AFR 225's, vic jr intake, wilson 4500tb, kooks 1 7/8 long tubes, x pipe, true duals, th350 with brake, 4k stall, pst driveshaft, moser 12bolt with 33 spline axles, eaton posi, tubular k member and a arms, 90/10 QA1's, QA1's in rear. AC and airbag removed, kirkey seats installed, bogarts on 325 radials. Gonna be on a plate kit, progressed 300 shot, and tuned and dynoed by Ryans Performance Machines. I have spohn lca's and torque arm which i will prob replace, just need ideas what is best. Thinking about madman torque arm and TRZ swaybar/panhard combo, any suggestions???

Steve Burger

iTrader: (33)

I would go rod end and adjustable everything. Take a look at our site and let me know if we can help.

You may want to start looking at motor plates as well.

Ryans_pewter_ss

iTrader: (9)

Thanks alot! I'll check it out, i also want the tubular bumper supports. Hope this thing moves along pretty good!

Steve Burger

iTrader: (33)

I see a package deal in your future