Need some advice with VHT
Thread Starter
TECH Resident
iTrader: (3)
Joined: Mar 2009
Posts: 863
Likes: 0
From: Bonne Terre, MO
Need some advice with VHT I want to test out some vht on the street this year, and was wondering what some tips and tricks would be from some that have had experience with it. I have heard to cut it down with alchohol, and I have also heard to use it in a sprayer, and then once put down to light it on fire with a torch. Any help would be appreciated. And on a highway with traffic and weather, how long can I expect a good prepped pad to last?
Cut it down with alcohol so that it will spray in a pump sprayer without cloging up the tip.Spray it down nice and heavy for a length of 10ft for each tire.Let it dry for 10-12 min.Do 3-4 burnouts in it too work it in after it has dried.It will get tacky after a coulple of trys.Respray as needed after 7-8 launches. Works best on concrete.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
On The Tree
Joined: Jan 2011
Posts: 176
Likes: 0
From: Indiana
I thin it with alcohol and spray it in a weed sprayer, I have also seen guys put nozzles in there wheel wells and run it from a windshield washer pump so you are actually applying it directly to the tire after your burn out, then use the sprayer to spray your launch area... This works good enough to yank the tires on a 8" DR on asphault...
10' only?? we spray some thing like 60' and lay a nice coat of of VHT using a weed spray bottle , do a couple of burnouts to lay some rubber and a light coating after that 
works like a charm on the asphalt we got here !
works like a charm on the asphalt we got here !
