Power cable, Driver's side firewall
03-09-2012, 05:49 PM
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Jun 2008
Location: OKC
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Power cable, Driver's side firewall I'm running the alternator cable through the Driver's side firewall for my battery relocate. I was wondering where a good spot for the hole is. Looking under the dash there's a lot of plastic in the way. Thanks for any tips
03-09-2012, 06:31 PM
#2
Staging Lane
iTrader: (9)
Join Date: Aug 2011
Location: Hopkinsville, KY
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
if its not a 6 speed then you can drill where the master cylinder would be. If it is a six speed there is still a good spot under the steering column, just cut some of that padding away. But what i would do since the original battery was located on the passenger side is run the wire into the factory grommet and into the car, that way there is no drilling and already a safe spot.
