RENE'S RAGE

iTrader: (96)

I need some race mufflers.
Race only car. I don't like open headers, too loud for me.
I know it adds weight but.
Headers have 3.5" collectors. I had the Dynomax Bullets before and didn't like them. I had a Borla XR-1 on a ORY and like that sound. But I don't want to spend $350.00 on the XR-1's.
I'll have about 8" of straight pipe off the collectors and then the mufflers and turndowns.
Thanks

Firehawk441

iTrader: (41)

I use the Quicktime Performance Race Mufflers.
Here's a thread with pics and videos that someone started...
https://ls1tech.com/forums/generatio...vid-added.html

06X6spdGTO

iTrader: (6)

DynaTech Splitflows!

Edit, those AR3 look like a splitflow copy with amazing sound!!

Anyone know what differents sizes you can get and how much they cost??

TurboStangJON

iTrader: (27)

I use Vibrants.

camscam02

iTrader: (21)

Same, 9inch long ones right off the headers on mine

Firehawk441

iTrader: (41)

2.5"-3.0"-3.5"-4.0"
I don't know pricing.

BES Stroked Nova

iTrader: (24)

I like my flowmaster bullets. Kooks headers, 3.5 collector, NAPA stainless steel band clamps, and a little BFH to the drivers side muffer so it would slide onto the header(hits the floor)

SSPerformance

iTrader: (76)

x2 . .

Zmg00camaross

iTrader: (11)

Do the 9 inch vibrants quiet it down at all? Want to drop more weight and that x pipe isn't the lightest.

TurboStangJON

iTrader: (27)

It seemed to be the same amount of noise when switching from duals in front of the axle to mufflers on the headers. It was louder inside the car though but that's because the exhaust is right below your feet.

RENE'S RAGE

iTrader: (96)

Vibrants???
Who makes them. I like the 9" length.
Anyone with a sound clip?
Thanks guys.

BES Stroked Nova

iTrader: (24)

Plus the flowmasters pay money if you win some of the stuff in LSX. Main reason I got them, but they sound pretty good also.

I used to have the vibrants, didn't do **** for sound to me.

Fbodyjunkie06

iTrader: (10)

Vibrant turbo mufflers here. 3"x5"

This is a cold start warm up:
http://youtu.be/fgTfMt6HBZk

Two nitrous pass videos:

studderin

iTrader: (28)

if you want to quite it down, id get a case muffler, like the QTP, or a magnaflow 4x9.

Something light and cheap ($15 each) these work great. I know me and ATV racer use them, fits for class stuff. Dont make it any quieter in the car with them dumped, but cut down a little at idle, not much.

http://www.summitracing.com/search/B.../?autoview=SKU


http://youtu.be/ueoptQMQbmc
http://youtu.be/jRHCOCWtWX8

Zmg00camaross

iTrader: (11)

I can handle that just fine, thanks for the info. If its louder then I won't hear the gear noise as much it's a win win.

96LT1355Z28

iTrader: (2)

I like my Flowmaster Outlaw race bullets. Flowmaster pays NMCA contingency, that was a main factor in my decision as to what to buy.

http://www.flowmastermufflers.com/se...fler&sc3=&sc4=

Firehawk441

iTrader: (41)

They sound good on your car.
Not legal for us at Englishtown but I like them.

thedudeZ

iTrader: (14)

I'm the one who posted the QTP thread quoted above. Great muffler, great people. Even with the gear and th400 I still enjoy driving the car around.

studderin

iTrader: (28)

ya there legal for LSX AM, and MIR were you just need to have a muffler, and no Db limit.

If anything JL you could make thous easy for 4, 4.5, 5, check out the pics of what they really are. Its just 10-20 spots somone hammerd a shape center puch thu the tubing, then there a 1/4 bigger secton of tubing thats kinda over that area There not even fully welded, they just have 2 tacks on one end the that outer cover doesn't fall off.
http://static.summitracing.com/globa.../SCH-63030.jpg
http://static.summitracing.com/globa...H-63030_IT.jpg

If you look on YB I think a few shops make somthing like them, if you want to buy somthing. I know the high end exhust places have them too, (burrs, SDP, staimless headers, vibrant) But not this cheap.

studderin

iTrader: (28)

Not to give to much away, but there dont cost much power, more accounting for the length of tubing they take up.
http://i2.photobucket.com/albums/y11...1223111915.jpg

pipemax