Kirkey's on stock seat tracks?
08-03-2012, 07:13 PM
#1
8 Second Club
Thread Starter
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
Kirkey's on stock seat tracks? Anyone have any pics of Kirkey's on the stock seat tracks? Or any track that allows movement front and back like the stock seat?
TIA!
TIA!
08-03-2012, 09:15 PM
#2
not sure of a c5 but a Fbody they were be really high up. unless your short its gona be tough getting the helmet on and off. And It hit the T top trim, I mocked it up.
and there not made to be movable, and should be fixed back mounted to be safe
and there not made to be movable, and should be fixed back mounted to be safe
08-06-2012, 02:19 PM
#4
On The Tree
I have a pair of seat tracks that were modded to fit lightweight poly type seats, and are movable could drill a couple of holes to fit whatever...sell the pair for $50 ezstriper@aol.com Rob
08-07-2012, 03:03 PM
#5
TECH Fanatic
iTrader: (9)
Join Date: Mar 2004
Location: Pasadena Texas
Posts: 1,318
Likes: 0
Received 0 Likes
on
0 Posts
I have kirkeys mounted on the stock NON power drivers tracks. it will move fore and aft and also rock up or down. I have an adjustable seat back bracket which mounts to the cross bar. I'm 5'11" no problems with clearence. I wanted my seat to give me good support under my thighs and to have a slight rear rake. It might matter which seat type you have. I have the lay back Pro design.
I had Corbeaus and don't like the seat setting flat on the floor. It puts alot of strain on my back.
On the Pass side I took the track apart and got rid of the slide. I drilled some holes in the bracket and mounted it. I still need to put a seat back brace on it.
I had Corbeaus and don't like the seat setting flat on the floor. It puts alot of strain on my back.
On the Pass side I took the track apart and got rid of the slide. I drilled some holes in the bracket and mounted it. I still need to put a seat back brace on it.
