LQ build. Need help with whats needed to complete
#1
TECH Enthusiast
Thread Starter
iTrader: (11)
Join Date: Apr 2012
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
LQ build. Need help with whats needed to complete
I have a 05 6.0 and its a complete long block with no accessories and from water pump to flexplate to intake with rails to pan. What will be needed to put this in my car.
I have a harness from a ls1 that will work on it correct?
Im swapping out the cam/lifters and springs for turbo setup.
Putting on a ls6 intake/ bigger injectors and using the same rails.
I want to run the alternator only on this engine. Is there anything else I need for the front engine at all? Stock crank pulley and alternator only with belt.
( who makes a badass alternator only kit? ) I need one lol
Im using a th400 so what will be needed for the install with engine/flexplate?
If anyone can lmk of anything else please let me know.
I have a harness from a ls1 that will work on it correct?
Im swapping out the cam/lifters and springs for turbo setup.
Putting on a ls6 intake/ bigger injectors and using the same rails.
I want to run the alternator only on this engine. Is there anything else I need for the front engine at all? Stock crank pulley and alternator only with belt.
( who makes a badass alternator only kit? ) I need one lol
Im using a th400 so what will be needed for the install with engine/flexplate?
If anyone can lmk of anything else please let me know.
#2
10 Second Club
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
I run an alt only. I used a BMR alt bracket with a really short belt. Works great.
I also run a th400. Get a TCI LS1 flywheel, and a converter with a snout for a ls1 or you can run any turbo converter with a small adapter ring. Some of the bolts on the bell are not used.
Get a shield or some safety device protecting you from the tranny blowing up. I use a CSR one piece shield on mine.
I also run a th400. Get a TCI LS1 flywheel, and a converter with a snout for a ls1 or you can run any turbo converter with a small adapter ring. Some of the bolts on the bell are not used.
Get a shield or some safety device protecting you from the tranny blowing up. I use a CSR one piece shield on mine.