Molnar cranks & rods?
Thread Starter
Joined: Nov 2005
Posts: 7,616
Likes: 65
From: NYC
Molnar cranks & rods? I'm researching what's gonna go into my short deck 598.
I've stumbled across Molnar Technologies.
Tom Molnar was at Oliver Rods, then founded K1 Technologies and now he's running Molnar Technologies.
Are their rods & cranks from US forgings or import?
Any thoughts on these good or bad?
I've stumbled across Molnar Technologies.
Tom Molnar was at Oliver Rods, then founded K1 Technologies and now he's running Molnar Technologies.
Are their rods & cranks from US forgings or import?
Any thoughts on these good or bad?
Thread Starter
Joined: Nov 2005
Posts: 7,616
Likes: 65
From: NYC
Hey Jim, thanks for stepping in here. Since I posted, I've confirmed Molnar uses offshore cores.
It looks like I'm gonna need some odd length connecting rods and Crower can handle making them for a reasonable price and "it's no big deal". Everybody else makes a big production out of custom rods. I'll be using a Crower crank too.
It looks like I'm gonna need some odd length connecting rods and Crower can handle making them for a reasonable price and "it's no big deal". Everybody else makes a big production out of custom rods. I'll be using a Crower crank too.
