pre-load the suspension w/M6??
Thread Starter
TECH Fanatic
Joined: Nov 2001
Posts: 1,413
Likes: 0
From: PURDUE
pre-load the suspension w/M6?? Can you pre-load your suspension with an M6? I thought I might be able to do this with my linelock, but this sounds like hell on the clutch? Any ideas/experiences?
On The Tree
Joined: Nov 2001
Posts: 179
Likes: 0
From: Richmond, KY
Re: pre-load the suspension w/M6?? Funny.. I just mentioned the same thing on the M6 burnout thread... no replies yet...but seems possible.
Just have to feather the clutch while the line lock was engaged...then drop it and see what happens.. I was thinking it would act somewhat similar to a transbrake (in behavior, not functionality!)..but it should keep from "shocking" the rearend and possibly busting the ring/pinion.
Just my 2 cents worth though..
Just have to feather the clutch while the line lock was engaged...then drop it and see what happens.. I was thinking it would act somewhat similar to a transbrake (in behavior, not functionality!)..but it should keep from "shocking" the rearend and possibly busting the ring/pinion.
Just my 2 cents worth though..
