springs and drag racing
Thread Starter
TECH Fanatic
Joined: Nov 2001
Posts: 1,413
Likes: 0
From: PURDUE
springs and drag racing I'm purchasing a 12bolt, ET Streets, etc for the upcoming Drag season. However, I hate the way my car sits. I have to lower it. I really want the G2 springs, which are linear in the rear, and progressive up front. Would I be crazy to spend all of this money to not break ****, but then put on these springs? Will these really hurt my launch, even if I run LCA relocation brackets? I think this has been asked before, so sorry if this is repetitive. Thanks alot.
!Dial-up Director
Joined: Nov 2001
Posts: 3,100
Likes: 1
From: Louisiana
Re: springs and drag racing No your not crazy! <img src="gr_images/icons/cool.gif" border="0"> I have a 12 bolt, Et Drags, 4.10 gears and I chose to lower the car with Eibach's Prokit. I have to leave pretty high so it won't bog off the line, and I don't have relocation brackets either. <img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
[ January 01, 2002: Message edited by: Jsears8 ]</p>
[ January 01, 2002: Message edited by: Jsears8 ]</p>
Staging Lane
Joined: Dec 2001
Posts: 77
Likes: 0
From: DFW, Texas
Re: springs and drag racing i was thinking the same thing about the LG Springs i also thought of doing LG springs in the front and V6 springs in the rear and taking a coil off of them, i'll keep the front sway bar off and put 50/50 shocks on the back. has any one ever tried this set up or something similar?
Thread Starter
TECH Fanatic
Joined: Nov 2001
Posts: 1,413
Likes: 0
From: PURDUE
Re: springs and drag racing Jsears - Thats a sweet setup you have! Interestingly enough, your car is modded almost exactley how I plan too. Thanks, if you can cut those 60 foots on a pro-kit, i'm sold! <img src="gr_stretch.gif" border="0">
