People with MAC headers read
They work excellent,But wait til I'm done testing to make a decision...
JS
Are your headers ported, or otherwise modded? I know alot of the members are running macs, but they are seriously worked over like mine were.
Just think the guy should know if they are modded or not.
Xciting Z,
Lots of guys have had good results with MACS. But the fit/finish on them has little to be desired in most cases. Many of the serious enthusiast end up porting them, or even modding the collector on them. Almost everybody mods the y-pipe.
I ported the snot weld out of the primaries (No big job)
and cut off the smallish 2.5x inch piece on the end of the collector and welded on a 3 inch piece. (Took all of about 5 minutes at the muffler shop.)
I dyoned 460RWHP @ only 5000rpms(Fuel problem) and 455RWTQ with them <img src="gr_stretch.gif" border="0">
I love my MACs <img src="gr_grin.gif" border="0">
Chris
Trending Topics
[ February 01, 2002: Message edited by: 383LQ4SS ]</p>
The Best V8 Stories One Small Block at Time






