Doug G

Just installed an electric water pump and having issues figuring out an alternator bracket.
Any ideas, pics, HELP

Thanks.

sillysspeed

iTrader: (21)

Bmr makes one

HioSSilver

iTrader: (8)

Jegs does to. That's the one i have. I you need i can snap a pic

blk00ss

iTrader: (66)

I use the BMR one as well.

nj02z

iTrader: (6)

BMR also.

Doug G

OK, thanks. Looking at and say F-body ....I'm using a truck balancer.

part numbers ?

Links ?

Pics are good too

JL ws-6

iTrader: (50)

Solid tensioner and figure out a belt length if you can't use the f body bracket

HioSSilver

iTrader: (8)

Not so sure a truck balancer will work. Aren't they offset different?

No need for a tensioner if you size the belt right

dad599

iTrader: (1)

Not to hi jack your thread, but does anyone make this type of setup for corvette spacing?

TTur1996

You can mount it this way just using a spacer to get the position right. It bolts straight to the block. Then make a bracket for the back to the block to adjust. Very simple setup. You probably should get rid of the stock balancer anyway. Then you can get one like this to eliminate everything. But you may be able to configure it to your exisisting setup.

racer442olds

iTrader: (2)

Not sure how much clearance you have but i bolted mine thru the lower threaded boss on drivers side with a spacer, then bolted the top to an adjustable link with heim joints to the lower water pump bolt.

Doug G

Thanks all.... I have some direction to look at.