Which size ET streets?
#1
Launching!
Thread Starter
iTrader: (6)
Join Date: Nov 2001
Location: Commerce, MI
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm going to buy Draglites for my car. The problem is that I don't know what size tire to use? Should I go with a 26x10.5-15 on a 15x8 or go with a 26x11.5-15 on a 15x10? I think the 11.5 will look alot better but I don't want to get it if it's too much tire for my car. My car dynoed 335rwhp and 355rwtq, but LS6 intake, Stage 2 heads and cam will be on by this summer. Ohh and its an M6 car. Thanks!
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Definitely go with the 11.5. They will also fit on the 8 inch rim if you decide to go that route. (I would recc the ten inch rim though.
The tread width is only around 9 inches with the 26x11.5 ET street. I think ET Drags or Hoosier slicks would be your best bet though <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Hope this helps <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Chris
The tread width is only around 9 inches with the 26x11.5 ET street. I think ET Drags or Hoosier slicks would be your best bet though <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Hope this helps <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Chris
#4
8 Second 6 Speed Director
iTrader: (6)
Join Date: May 2002
Location: windsor, ont. canada - Home of the fastest LT1 6spd.
Posts: 3,293
Likes: 0
Received 1 Like
on
1 Post
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
imo, if these are for the track only get the 11.5's, you'll have plenty of power with h/c on the motor!