Drag Racing Tech
Sponsored by:
Sponsored by:

Disable airbag for track - Fuse?

Old May 30, 2018 | 02:23 PM
  #1  
Tan327's Avatar
Thread Starter
TECH Fanatic
iTrader: (15)
 
Joined: Nov 2005
Posts: 1,764
Likes: 1
From: STL
Default Disable airbag for track - Fuse?

I have a track only T/A that I'm looking to disable both airbags on until I can pull them. Anyone know if pulling the fuse in the interior panel is sufficient? (seems like there would be a secondary power in case the fuse goes bad). Looking to prevent them from going off on a hard launch or if the front end lands hard. Any info is appreciated.
Reply
Old Jun 2, 2018 | 08:32 AM
  #2  
01ssreda4's Avatar
TECH Senior Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (96)
 
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
Default

fuse will be fine. The controller is under the center console, you could unplug it also if you want.
Reply
Old Jun 2, 2018 | 09:00 PM
  #3  
Tan327's Avatar
Thread Starter
TECH Fanatic
iTrader: (15)
 
Joined: Nov 2005
Posts: 1,764
Likes: 1
From: STL
Default

Appreciate it man, and also thanks for all of the weight reduction posts over the years.
Reply
Old Jun 3, 2018 | 08:58 AM
  #4  
01ssreda4's Avatar
TECH Senior Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (96)
 
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
Default

Its been a journey!! And it aint over yet.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:05 PM.