Anyone run open manifolds??
#1
TECH Senior Member
Thread Starter
Re: Anyone run open manifolds??
Sure, they'll help you. BUT, be sure to use some ~18" or longer (I'd go longer to be on the safe side) extensions or you'll throw your Ltrims WAAAAAAAAAY off and you'll run pig rich and slow. The extensions keep the oxygen rich outside air from coming into contact with the O2 sensors.
When you say you're going for the internally stock record what do you mean exactly? They have an internally stock class at that race or do you mean you're shooting to run low 11s internally stock? I think the LS1Tech internally stock record is 11.2-3. That would be damn near impossible at any weight with any setup with stock manifolds and without excellent weather.
When you say you're going for the internally stock record what do you mean exactly? They have an internally stock class at that race or do you mean you're shooting to run low 11s internally stock? I think the LS1Tech internally stock record is 11.2-3. That would be damn near impossible at any weight with any setup with stock manifolds and without excellent weather.
#4
TECH Veteran
iTrader: (4)
Join Date: Nov 2001
Location: Simi Valley, CA
Posts: 4,712
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone run open manifolds??
I ran 11.1 on stock open manifolds and a 100% stock longblock a few years back in my 98 z28. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
#5
TECH Enthusiast
iTrader: (4)
Join Date: Nov 2001
Location: Hockeytown/MotorCity
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone run open manifolds??
Actually I have a better idea. I have a mac Y-pipe I used on my z28. But it doesnt fit on my SS because the manifold length change. So I will just cut that up for extentions. I should cut so the openming is angled towards the ground right?
#6
TECH Enthusiast
iTrader: (4)
Join Date: Nov 2001
Location: Hockeytown/MotorCity
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Anyone run open manifolds??
Ok a huge drag racing event for me is next week and i dont have enough time for headers. However I need to do something because i know my restrictive exhaust is killing me. I am going for stock internal record. Will open manifolds help me?