Wolfe rear spring perches

Reply Subscribe

Thread Tools

Search this Thread

Jun 21, 2005 | 07:33 PM

xssive

Thread Starter

TECH Addict

iTrader: (123)

Joined: Nov 2001

Posts: 2,256

Likes: 2

From: Austin, TX

Wolfe rear spring perches

How do the worle rear spring perches mount? From their site, it looks like they are welded somewhere on the frame?

Also, do they use a smaller diameter spring?

Jun 21, 2005 | 07:59 PM

B18B1LS1

TECH Fanatic

iTrader: (12)

Joined: Nov 2001

Posts: 1,711

Likes: 6

From: Lawrenceville, Ga

You cut out the top side of where your springs rest from the factory (the little bubble area) and you weld them in there. The springs most people use are the same size top to bottom I believe, about the size of the bottom of factory springs.

Jun 21, 2005 | 08:36 PM

Dan / Wolfe Race Craft

FormerVendor

iTrader: (3)

Joined: Jan 2002

Posts: 417

Likes: 0

From: Ft. Worth, TX

Yes they weld up where the top of the spring sits. B18b1ls1 is correct, you cut the portion off that the stock spring goes around. They use a standard coil-over spring.

Jun 21, 2005 | 08:56 PM

SLowETz

10 Second Club

iTrader: (12)

Joined: Nov 2001

Posts: 2,356

Likes: 2

From: Padded cell

Dan-

What are the benifits of this mod alone?

Currently running your 6 point and your weld in rear drag bar.... good stuff.

Jun 21, 2005 | 10:39 PM

xssive

Thread Starter

TECH Addict

iTrader: (123)

Joined: Nov 2001

Posts: 2,256

Likes: 2

From: Austin, TX

Is it possible to get to that top spring perch without having mini-tubs? It looks like there isnt alot of room up there with the factory fenderwell in place

Jun 21, 2005 | 11:44 PM

Outlaw

8 Second Club

Joined: Jan 2004

Posts: 504

Likes: 1

From: Bay Area, CA

Quote:

Originally Posted by xssive

Is it possible to get to that top spring perch without having mini-tubs? It looks like there isnt alot of room up there with the factory fenderwell in place

Yes I have them and my car is not mini tubbed