Launching
Launching 
if you have a stock 10 bolt I dont suggest launching it at all on a sticky tire.
here's my setup.
moser 12 bolt, 4.10, spec stage 3 clutch, 28" M/T, 6,000 RPM dump. dead hooked and clutch said bye bye. we'll try it again in spring once the built trans goes in.
here's my setup.
moser 12 bolt, 4.10, spec stage 3 clutch, 28" M/T, 6,000 RPM dump. dead hooked and clutch said bye bye. we'll try it again in spring once the built trans goes in.
6600rpm..... off the revlimiter. it'd bog even then. this was with headers, cutout, and lid being the only power mods. also only had 3.73 gears at the time. when you get a good rear end, go straight to atleast a 4.30 gear if you have a manual. highway rpm is still acceptable and you can use 5th in town with good gears
Originally Posted by stangereater
Same thing happened to my clutch i didn't even get to make one pass at the strip.
