More progress pics 2
More progress pics 2 New steering wheel
Mufflex mockup, Pops had to change the angle over the axle because of the sump tank.The muffler had to move forward.
Pops made his own panhard rod re-locator to lower it down, bought another one out of a junkyard, made it longer, made brackets and dropped it down.
David
Mufflex mockup, Pops had to change the angle over the axle because of the sump tank.The muffler had to move forward.
Pops made his own panhard rod re-locator to lower it down, bought another one out of a junkyard, made it longer, made brackets and dropped it down.
David
Last edited by FASTFATBOY; Feb 11, 2006 at 03:09 AM.
Smokn....if you look closely at the pics it has billet aluminum LCA's, they are built and sold by a guy on this board(cant remember who) he also sells them on E Bay.But we popped for the chrome moly heim ends, not the teflon coated ones.
Tom....thanks, the old man is a crafty one.....he took the two braces cut them on an angle to give extra length and made the bracket to lower it. Works very well..this little exhaust endeavour has been a pain in the ***, we still have to build a 3.5 inch Y pipe, we are going to mod the floor brace under the drivers feet to move the pipe up so it dont srape every pebble in the road.
David
Tom....thanks, the old man is a crafty one.....he took the two braces cut them on an angle to give extra length and made the bracket to lower it. Works very well..this little exhaust endeavour has been a pain in the ***, we still have to build a 3.5 inch Y pipe, we are going to mod the floor brace under the drivers feet to move the pipe up so it dont srape every pebble in the road.
David
Ed, well gotta give the kudos where they are due...I been kinda sick and outta pocket, he has picked up the slack. We are planning to tow up there for a tune in the summer. When we get closer I will send the ECM for a mailorder break-in tune.
Moparnos, just the brackets wont get er done...gotta lengthen the brace also.
Thanks
David
Moparnos, just the brackets wont get er done...gotta lengthen the brace also.
Thanks
David
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo