Speechless 
My Chute Install
Thread Starter
TECH Veteran
iTrader: (13)
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
My Chute Install Thought I would post this here - as well as Forced Induction - since there was a trend earlier on parachute install.
Finally got off my *** and bought one of the last pieces to my 98SS build. A Stroud parachute. Bob at JJ's helped ensure that I got the correct one. It's non-spring nor CO2. The pilot chute is spring loaded - as Joey found out
. I personally think it looks great. It's non-removal for a street time. Oh well.
Final prep for first time firing is almost complete. The wait is killing me
First weekend of racing is this weekend. Oh well.
Here's a couple pictures of the cute
Removed rear bumper support, fab'd chute support, attached to frame
Side view
Rear View
Chute release - yep it's the E-brake; haven't used it in the last couple years away
David
Finally got off my *** and bought one of the last pieces to my 98SS build. A Stroud parachute. Bob at JJ's helped ensure that I got the correct one. It's non-spring nor CO2. The pilot chute is spring loaded - as Joey found out
. I personally think it looks great. It's non-removal for a street time. Oh well. Final prep for first time firing is almost complete. The wait is killing me
First weekend of racing is this weekend. Oh well.Here's a couple pictures of the cute
Removed rear bumper support, fab'd chute support, attached to frame
Side view
Rear View
Chute release - yep it's the E-brake; haven't used it in the last couple years away
David
Looking good David. When are you taking her out??????
Thread Starter
TECH Veteran
iTrader: (13)
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
Originally Posted by MADMAN
Looking good David. When are you taking her out??????
). Our initial date was this weekend, but that has slipped at least a week or two. We'll see. We'll have to totally re-scale the car when it gets done. Seems like we take off pounds, and add them right back on some where else.
Here's a couple of engine-bay pictures.
David
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
David if you need any pointers when you rescale call me!!!!
Thread Starter
TECH Veteran
iTrader: (13)
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
Thanks everyone. A lot of time, labor and love have gone into this the SS's last build. We are going to be taking it to its limits on stock chasis set-up.
Brian, thanks for the offer - we will be taking you up on your offer when the time comes.
Derek we are building an 8 second bracket racer .
We are going to be going on some Friday/Saturday night street cruises. We've been invited to more than a few car shows with it. Don't think I'll be able to drive it to work, gas prices are a killer for 114.
We figured it would be pretty cool to going cruising in the SS with a chute, wheelie bars, slicks and skinnies - all on an 8 second car
Joey for Excessive AutoSports has out done himself on this build. Not bad for a 2 stall, 3 person operation.
David
Brian, thanks for the offer - we will be taking you up on your offer when the time comes.
Originally Posted by Villain281H
Wow David
Not much of a 10 second bracket car anymore
Is she still gonna see any street time or is this a bad-*** race only car now?
Derek
Not much of a 10 second bracket car anymore
Is she still gonna see any street time or is this a bad-*** race only car now?
Derek
Derek we are building an 8 second bracket racer
.We are going to be going on some Friday/Saturday night street cruises. We've been invited to more than a few car shows with it. Don't think I'll be able to drive it to work, gas prices are a killer for 114.
We figured it would be pretty cool to going cruising in the SS with a chute, wheelie bars, slicks and skinnies - all on an 8 second car
Joey for Excessive AutoSports has out done himself on this build. Not bad for a 2 stall, 3 person operation.David
7 Second Club
iTrader: (5)
Joined: Nov 2001
Posts: 8,834
Likes: 1
From: Gainesville, Florida # of drag strips runs: ?!?!?
Originally Posted by Navy David SS
We are going to be going on some Friday/Saturday night street cruises. We've been invited to more than a few car shows with it. Don't think I'll be able to drive it to work, gas prices are a killer for 114.
We figured it would be pretty cool to going cruising in the SS with a chute, wheelie bars, slicks and skinnies - all on an 8 second car Joey for Excessive AutoSports has out done himself on this build. Not bad for a 2 stall, 3 person operation.
David
We figured it would be pretty cool to going cruising in the SS with a chute, wheelie bars, slicks and skinnies - all on an 8 second car
Joey for Excessive AutoSports has out done himself on this build. Not bad for a 2 stall, 3 person operation.David
I want vid footage when driving around and the first few shake-down runs.Hey there's a big GM show in Ocala, FL in October (hint, hint) where Chevy High Performance and Super Chevy will be in attendance that I have a small hand in. Wanna make a road trip? Super Chevy Show is the following weekend at Gainesville Raceway, then World Street Nationals at Orlando the week after that.
Derek
Thread Starter
TECH Veteran
iTrader: (13)
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
Originally Posted by Villain281H
Sweetness! I want vid footage when driving around and the first few shake-down runs.
Hey there's a big GM show in Ocala, FL in October (hint, hint) where Chevy High Performance and Super Chevy will be in attendance that I have a small hand in. Wanna make a road trip? Super Chevy Show is the following weekend at Gainesville Raceway, then World Street Nationals at Orlando the week after that.
Derek
I want vid footage when driving around and the first few shake-down runs.Hey there's a big GM show in Ocala, FL in October (hint, hint) where Chevy High Performance and Super Chevy will be in attendance that I have a small hand in. Wanna make a road trip? Super Chevy Show is the following weekend at Gainesville Raceway, then World Street Nationals at Orlando the week after that.
Derek
Derek: We'll post the videos as soon as they are done - hopefully soon
A road trip. Sounds great, but sounds like I'm just living in the wrong part of the States. Nothing half that good ever comes even close to up here. Every part of that trips sounds great - BUT with gas prices I doubt it would be feasible. At $3+ a gallon and 8 miles/gallon, the cost would be a huge factor. Don't have a sponsor that will pay for gas. My hotel gets towed behind me
I am also kicking around the idea of trying out a set of drag radials - like 325 or 335's. I'll wear out the set on the SS right now.
David
7 Second Club
iTrader: (5)
Joined: Nov 2001
Posts: 8,834
Likes: 1
From: Gainesville, Florida # of drag strips runs: ?!?!?
Originally Posted by Navy David SS
A road trip. Sounds great, but sounds like I'm just living in the wrong part of the States. Nothing half that good ever comes even close to up here. Every part of that trips sounds great - BUT with gas prices I doubt it would be feasible. At $3+ a gallon and 8 miles/gallon, the cost would be a huge factor. Don't have a sponsor that will pay for gas. My hotel gets towed behind me
Just thought you might want to bring it and try your luck against the radial cars at Orlando.
I might have room in the garage for a sleeping bag or 2
Derek
