Rear Suspension Setup
Thread Starter
TECH Enthusiast
iTrader: (87)
Joined: Sep 2004
Posts: 601
Likes: 0
From: Charleston, SC
Rear Suspension Setup I am going to begin tackling the rear suspension in a week or so and wanted to get some pointers/insight of what folks are running. Here is a list of what I have so far...
Adj BMR LCA's
Adj BMR PHB
Adj BMR Torque Arm (running true duals so I probably need to stick w/ this)
Torque Arm Relocation Bracket
Bolt in Relocation Brackets
Weld in SFC
Curious on what springs and shocks to run since mine have over 100K on them. Also what kind of rear sway bar. Thanks for all the inputs, Mike
Adj BMR LCA's
Adj BMR PHB
Adj BMR Torque Arm (running true duals so I probably need to stick w/ this)
Torque Arm Relocation Bracket
Bolt in Relocation Brackets
Weld in SFC
Curious on what springs and shocks to run since mine have over 100K on them. Also what kind of rear sway bar. Thanks for all the inputs, Mike
QA1 for the low ball stuff or Strange/Afco for the good stuff. The staoc rear springs will work but get the aftermarket front in either 325, 300, or 275.
As for rear swaybar get either a Billingsley or a Wolfe.
As for rear swaybar get either a Billingsley or a Wolfe.
