View Poll Results: Sway Bar?
BMR
13
23.64%
SPOHN
37
67.27%
billingsley
5
9.09%
Voters: 55. You may not vote on this poll
rear sway bar???
i was going to get the spohn,but thunderracing told me it can tear up the car with alot of street driving,it's loud and more of a true drag piece and not as good for street cars.(this is what i was told) i got the BMR,it's quiet on the street,really stiffens up the car and i went from a 1.50 60 foot to a 1.42 new best 60 foot with it. once i found the right adjustment(it was easy) she luanches hard and straight now.
billingsley and wolfe are teh exact same bar
the bmr and spohn are nearly exactly the same bar
so what this post is really asking is
stock style bar with poly bushings on the axle versus race style welded onto the axles.
the bmr and spohn are nearly exactly the same bar
so what this post is really asking is
stock style bar with poly bushings on the axle versus race style welded onto the axles.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by STL2SLO
Anyone here using the 1" solid bar from Spohn? It is like the factory but more beefy and doesnt have all the adj. links...
I also have the 1 inch solid bar, so far it's worked out pretty good, I suspect I start spraying out of the hole and a wolfe will be goign on in it's place though... you can preload the solid oen if you play with the lenth on the end links but it's a pita compared to one with a little ti-rod attaching it to the chassis.
I have driven with my spohn for over 5 k and no problems. My buddie has his and has touched 9's with over 10k on it and no problems what so ever. Thunder is feeding you a line on that one.
