austin21

there is a guy on another forum that im on that based in my home state he has a 00' Z and he says on stock heads and cam he is running 12.25 could this really be true or should i rais the bs flag and call him out on it ?....imo i think its bull **** but what do you guys think

wldesyWS6

iTrader: (2)

it could be true- gears, headers, the right supporting mods and some DRs and you might be surprised

austin21

oh ok thanks

austin21

ok the guy just told me he "has god's motor and there are NO power adder's "

lookin4aTA

he is probably on the juice. ask him if you can check his car over and find out what he REALLY has.

B.W.

iTrader: (3)

He's not necessarily on the juice. That is definately bolt on territory, especially if he is an A4 with a stall

Wes_SS

the damn thing might be hacked up to loose some weight, thats also a consideration, plus a stall and goodies

darrensls1

Look at my sig. 12.4 @ 108 on stock internals and no N20. Plus I have no weight reduction, no LS6 intake, no underdrive pulley and my stall isn't the most effiecient (I could probably improve my times with a Yank SS3600).

Add all that to my car and I'm probably pushing 11.9's. So it is possible but do not dismiss the possibility that he could be full of crap

TransAm8723

Definitely possible. Check my sig on worn DR's. I haven't ran the car on my slicks yet. He might be BS'ing, but the possibility is definitely there.

Jeremy

Nemo02Z

I would ask what does he consider stock, people used the term stock loosely, I know here in Texas my car stock from the factory it ran 13.8, I have read people in other states running faster than this from the factory, just depends on conditions...

'Trust'

iTrader: (24)

Absoultely possible, a decent cam, bolt ons and a stall or good shifing will get you there. There is a guy in the 11's on all stock internals, bolt ons, and weight reduction here in a 6speed.

WhiteStripes

iTrader: (1)

The point here was that he didn't have a cam.

StoleIt

iTrader: (3)

Racing section please.