HVAC question
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Saban Country
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
HVAC question
Is it necessary to remove the entire dash to pull the heater and evap? I have the clove comp. tray removed right now and it looks like I need some more room. Also is there any thing I need to avoid to keep the airbag from coming out? I am planning on removing the module that sits on the driveshaft tunnel soon.
#4
TECH Resident
iTrader: (1)
Join Date: Apr 2006
Location: OMG I'm in Kansas
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SiL3NtXWS6
You don't have to pull the dash out, but you will need to undue all bolts holding it down, pull it out and lean it forward. Don't forget to undue the steering column
Its not an easy job.
#5
TECH Veteran
iTrader: (32)
i pulled my dash out. Get a buddy and just take your time and it all come out pretty easy. I didnt break anything besides the big dash panal under the windshield. Other wise its pretty frickin easy IMO. Like i said, get a buddy and take your time and should take about 2-3 hours and itll all be out. Dont get scared. And if you notice, go to Menards/Home Depot and get some aluminum tape. thats what i used to cover some firewall holes. It holds it shape around curves and seals up things real good.