i tried every thing on my car MT et street , every single susp mod (TA.PHB, LCA relocation brackets and still can't lanch hard in the street with my stalled A4 camaro from dig ...will track bit liqued solve my tracktion problem is it going to hook like the strip... i did 11.9 1/4 time before


wht do ya al think?

 

Unfortunately it does not come in scented candles.

 

I have not seen this yet, how is it used ?

 

it works great as long as you know how to use it. i have launched my 9 second car on the street (300 shot off the trans brake) and dead hooked.

 

its a sticky substance that you can pour in front of the tire and do you burn out in it or just apply it to the tire.

 

I would brush on the night before, I had good luck with VHT, tires lasted longer and hooked better at crap hole tracks. I've never had any of my cars on the street, so I don't know if it works on asphalt.

The best thing I ever tried was rotating slicks every 5 pass', that helped a ton.

 

we tried it on a buddies 04 cobra for a track/old runway and it hooked pretty good for him using street tires.
doen anyone else think it smells like gummybears?

 

Taste's Like gummybears for sure.

mmmmm.


Tony.

 

I say more of a Cotton Candy Smell.
Whatever you do dont do it like this kid.
http://videos.streetfire.net/search/...6b009c5c5a.htm

 

that is a funny video. did any even get on the ground?

 

LOL @ the video. He's sprayin' for mosquitos or something.

When I was 'carrying', I'd have a detergent bottle full of the stuff - and have a buddy squirt a small pool in front of the rear tires. Pull in to the pool, quick spin of the tires, and then creep to the line (give it time to set up). Beats having no track prep at all...

 

x2 on the cotton candy.

 

if it doesnt set up, you will smoke your tires out of the hole.
you want very little on the ground.
as far as spaying it on your tires the night befor-------- by the time you get to a street race it will be gone. along with alot of dust, road rocks and other crap stuck to the tires.

 

I have a gallon in the car it works great... but I can launch my car off rev limitor and it wont spin more than 3 feet on a tire.. your not set up right

 

On the street?

 

only place i really race

 

are you adding it to the tire or what?

 

No get yourself a good sprayer (preferably a Concrete Sprayer) watch the video and you will see how good the other sprayer lays down. Its just like painting, if you put too much on it will puddle and wont dry as fast, if you "paint" the road it will be perfect. When that tacks up, depending on how warm it is, just pull a foot or two back from the starting line and pour a puddle and do your burnout. Make sure you do it a couple feet back else you will get backed up right into the puddle.

 

This man knows how to street race... and if the tires are old and to the point of not sticking well clorox for a burnout and usually a good long 2nd gear burnout And Lineing up in your tracks helps too... so many things you can do

 

woow good feedback guys ....

i just bought a 1g of that VHT and spray it on my tires is that a good way to use it and how long it needs to set before i can race?