Plug question and other
#1
Plug question and other
Asked this in the N20 section but had no replies I think because its not the same ol basic questions like "What kit to go with?" and I get good replies here so here it is.
How much E.T. can you loose if any running on the motor on a plug that is made for a 300+shot?
My 83 before I got it ran 11.0-11.1 spinning all motor with the big N20 plug in it.
How much is there left on the table with a good motor plug in it?
I am thinking the 83 has only been run on one stage for a full pass.
On the motor is went 11.0-11.1 (can't remember the mph but it was higher then a 11.0 ET), on the bottle it went a best of 10.4@136
The past owner had another guy who bilt the car do all the jetting so we don't know what its jetted to but he thinks its a 150 at most on the first stage.
11.1 to a 10.4 is .7. Thats what, roughly a 150 shot or 125?
Once I get this suspension on the car and get it hooking and make a full 2 stage pass I might be REALLY suprised. He said if her remembers right both stages add up to a 300 shot. I do plan to check that before I make any bottle runs.
Saw hooking it goes 9.9 on the first stage then a 200 on the second.....
How much E.T. can you loose if any running on the motor on a plug that is made for a 300+shot?
My 83 before I got it ran 11.0-11.1 spinning all motor with the big N20 plug in it.
How much is there left on the table with a good motor plug in it?
I am thinking the 83 has only been run on one stage for a full pass.
On the motor is went 11.0-11.1 (can't remember the mph but it was higher then a 11.0 ET), on the bottle it went a best of 10.4@136
The past owner had another guy who bilt the car do all the jetting so we don't know what its jetted to but he thinks its a 150 at most on the first stage.
11.1 to a 10.4 is .7. Thats what, roughly a 150 shot or 125?
Once I get this suspension on the car and get it hooking and make a full 2 stage pass I might be REALLY suprised. He said if her remembers right both stages add up to a 300 shot. I do plan to check that before I make any bottle runs.
Saw hooking it goes 9.9 on the first stage then a 200 on the second.....